Instant Embellished Onesies For Summer

Summer with a baby under 6 months is tricky because they're too little for sunscreen. After a bit of research, I decided on long sleeve white onsesies with UV babylegs and a sunhat to keep babe covered and cool. The only problem is that white onesies are bo-ring!

So, I did what any crafty mama would do and dove into my fabric stash! I cut darling little scraps out of my favorite fabrics and zig zag stiched them on. I didn't want them to look the same, all sewn in the center of the chest, so one has a tiny fox on the 'breast pocket' and another has a coordinating embellishment on the back as well.

So far, they've been awesome for keeping Asher cool and safe. Plus, it's a great scrap-stash buster.

I wish I was able to get better photos, but we are constantly using them!

Tutoria Upgrade- Making Your Own Labels the Smarter, Faster Way!

I had a very small amount of time to make a very large batch of labels and needed to make the process more efficient. I cannot believe I didn't think of doing it this way before.

Instead of cutting my ribbon or twill tape, I just ironed 5-6 onto the ribbon at a time. SO much faster! It keeps them way more organized for storage and cuts down on the amount of ribbon wasted. I've included the (extremely popular) original tutorial beneath for convenience, but with fewer steps, since I'm getting smarter.

Materials:
Iron on Transfer Paper (I just used the t shirt kind)
Printer
Scissors
Iron
Ribbon, twill tape or whatever you like best. Just make sure it's iron safe!

1.) In Keynote or Powerpoint, arrange your logo in rows. I printed out a few test sheets to get my labels just the right size. FLIP YOUR IMAGE! I may or may not have forgotten this step and wasted a sheet of transfer paper. If you're using a Mac, use keynote. Powerpoint for Mac has no 'flip' feature to make your logo a mirror image. Print onto transfer paper according to package directions.




2.) Cut out your transfer paper labels and position as many labels as your iron will cover (I managed 4-6 at a time) on the uncut ribbon or twill tape.

3.) Iron those suckers on. Like crazy. When you think you might be scorching the ribbon, wait another few seconds! Make sure to read the transfer paper directions so you know what heat setting to use and if you should use steam or not. I peeled off the paper backing at random intervals as a sort of quality control, to make sure they were stuck. The rest I left on when I rolled it back onto the spool to protect the tags.

Isn't that sooo much easier?

DIY Mother's Day Flower Pots

Here's a pretty, handmade gift for the mom in your life this Mother's Day. It cost us under $15 and can be finished in a lazy afternoon.

Supplies:
Clay Pot; big enough to hold your herbs or flowers
Dirt
Permanent Marker
Chalkboard Paint 
Masking Tape
Optional: acrylic paint for a border

We taped off a rectangle with the masking tape and painted it with blackboard paint according to the directions on the bottle. When it was dry, we peeled off the tape and wrote on the opposite side with Sharpies. Once we had planted our basil, we added the white border and left it to dry.

Picnic Perfect Lemonade by the Jar

This lemonade is the best I've ever made and it only takes 3 steps, 2 ingredients and I made 4 jars in less than 5 minutes. I'm thinking I could even add a shot of vodka for hard lemonade for a grown up BBQ!

Supplies & Ingredients:

250 mL Mason Jars (as many as you'd like!)
Measuring Cup and Spoons
Sugar
Lemon Juice
Hot (or boiling) water
Ice Cubes

1.) Add 1 heaping Tbsp of sugar and an inch of hot tap water to each mason jar. Put on the lid and shake to dissolve the sugar.


2.) Add 30 mL (2 Tbsp, 1/8 cup) or lemon juice to each jar.

3.) Pack full of ice cubes and screw the lid on. It will be perfect by the time you unpack your picnic lunch, just give it a little shake before you open it!

If you plan on drinking it right away, add 2-3 ice cubes and fill the rest of the way with cold water. Yum!

Tutorial: DIY Forward Facing Bookselves

I love forward facing bookshelves and have been wanting to buy some for quite a while. I'd been putting off making a purchase and snooping for tutorials for a while when I finally found a great tutorial on JOT.

In true Freya style, I skimmed the tut and winged it. Here's how I DIY'd all four of these shelves for under $25 including paint. It was actually really easy, especially since they did the cuts for free at the hardware store.

Supplies:
2x2x8 lumber (mine were cut into 4' lengths by the guy at Home Depot)
Trim, 2.5-3" tall and cut to the same length as your lumber. I used flat back baseboard trim with a simple profile.
Glossy Paint. Glossy is more durable. I used quick dry spray, but any kind you like works.
Flathead Wood Screws #12 x 3". We used 3 screws per 4' length
1.5" Finishing nails
Drill
Hammer or Nail Gun
Stud Finder
Level
Measuring Tape

1.) Paint your wood and trim the day before.

2.) Pick your spot on the wall. Use the stud finder to locate your studs and shift your position so the spacing is reasonably even. Using your level, make marks, on the studs, where you want the screws to go. We put the center screw on one stud and the outside screws into the next stud on either side.

3.) Pre-drill holes into the lumber and the wall. Staring in the center, screw the lumber to the wall. Check for level BEFORE you screw the end screws in!

4.) Decide on your spacing and continue on up the wall. We used 16" gaps between each of our 4 shelves.

5.) Nail trim to the front of your shelves. Make sure the bottom and corners are flush and nail away. Space the nails differently than the screws so you don't nail into metal! We used 4 nails on each shelf.

6.) Done! I just touched up the nail heads with a little white craft paint and that was it. The project only took and hour and a half or so after the painting was done.

One of my best bang-for-the-buck DIY projects so far. $2 per 2x2x8, $0.59 per foot for the trim, $8 for screws and nails and $5 for paint = $22 total!

Easy Custom DIY Decor- Yarn and Twine Wrapped Ball Tutorial

Here's a super easy project that you can customize for your color scheme; yarn wrapped balls.

Materials:
Glue Gun or Glue Dots
Yarn/Twine/String/Rope
Styrofoam balls in desired sizes

Instructions:
1.) Glue one end of your yarn to the Styrofoam ball.
2.) Wrap and wrap until it's all covered and looks pretty.
3.) Cut the yarn and glue the other end down.

Yup, easy as 1-2-3. A cool DIY design project done in 20 minutes.

This would be a great housewarming or hostess gift! Easy, cheap, fast and made to co-ordinate with their decor!

Easy-Peasy DIY Wall Art

I found this genius idea somewhere on the world wide web and had to use it immediately! We're slowly re-decorating our house and there was a perfect unused spot on the wall for these little gems. All you need are embroidery hoops and fabric. So easy, and so darling!

10 Minute Piggy Bank

Who doesn't love a great "no skills required" craft once in a while? This little project reminds me that simple, re-purposed materials are usually the most intriguing for a child.

A few months ago bought some lovely organic cream that came in a glass bottle (it makes me wish I enjoyed home-coffee as much as store-coffee so I could buy more cream).  I just couldn't resist the container and when I was done I didn't want to put it into the recycling bin, so I gave it to Daniel to play with.

My Dad was visiting and watching Daniel 'plink' the coins into the bottle when he suggested we make it into a real piggy bank. He just cut a little slot into the lid with a utility knife and it was done. It's been a favorite toy for quite a few months now. Good call by Papa!

Pinto Beans, Sweet Potato and Quinoa in Tomato Broth: Better and Faster than it Sounds!

This is my favorite soup recipe. I found it in Mothering Magazine, and then adapted it to our taste. It's so nutritionally dense, it's hard to believe that it tastes as good as it does! I'm making it tonight and thought I'd share.

Pinto Beans, Sweet Potatoes, and Quinoa in Tomato Broth

1 1/2 cups canned pinto beans

1 cup quinoa, rinsed

7 cups chicken or vegetable stock

1 T extra-virgin olive oil

1 small yellow onion, minced

2 large cloves garlic, minced

1 tsp ground cumin

1 tsp minced fresh oregano or 1/2 t dried oregano

1 bay leaf

Salt and pepper

1 1/2 cups canned tomatoes, finely diced, with juice

1 orange sweet potato, peeled, diced small

Rinse pinto beans and set aside.

Place quinoa in small pot and cover with 1 1/2 cups stock. Bring to boil, immediately turn down to simmer, cover, and cook until quinoa has absorbed all liquid (about 15 minutes). Keep warm.

Heat olive oil in 4-quart pot over medium heat. When hot, add onion and cook until soft around the edges (4-5 minutes). Add garlic and chipotle chile and cook 1 minute more. Add cumin, oregano, bay leaf and a little salt and pepper. Cover with remaining stock and diced tomatoes with their juice. Bring to a simmer and cook 10-15 minutes to allow stock to become well-flavored. Add sweet potato and simmer 10-15 minutes more, until sweet potatoes are tender.

Add pinto beans to broth and bring back to a simmer. Divide warm quinoa among deep bowls. Ladle hot broth into bowls. 

Garnish with a dollop of plain yogurt, avocado and green onion. If Daniel's not into it,  I'll add crushed tortilla chips to his soup as well.

The Mothering Recipe calls for a roasted chipotle pepper in the soup and suggests topping with lime, cabbage, feta or radishes as a garnish.