Wednesday, November 10, 2010

Sock Monster Tutorial

 

Last night I made my very first sock monster, and this is how I did it! Please excuse the photos. It was late, and dark!


I used the heel of my sock as a bum for my little monster, because I wanted her to be able to sit.


Then I cut a small V at the toe of the sock (for ears/eyes). And a slit at the bottom for legs. Make sure not to cut too high on the legs...it should be just a bit below the heel of the sock (the 'bum'). Turn inside out and sew, right sides together, the V for the ears, and the all round the legs. Your monster will be sewn shut with no way to turn right side out, but don't worry!


Next, cut VERY small holes for the arms. They will stretch out a lot, so keep them small. SMALL. Then, flip the monster right side out through the arm holes.


And stuff...

Now for the arms. One the other sock, cut in half lengthwise from the opening to the heel, and across to make 2 arms. I wanted my little monster to have 2 fingers, so I cut a small V in the top of each arm.


Turn inside out and sew, right sides together, leaving the base open. Turn, stuff and sew onto the monster, right where that little hole is. Then, make sure your monster is full enough with stuffing and attach the other arm.


Sew on eyes, and add a felt mouth. I glued the felt on because I was getting tired! I also added a sweet little felt heart by her bum.

If you leave an opening when sewing your monsters legs to turn it inside out and stuff it, you can sew the arms completely shut (after turning and stuffing) and sew them onto the sock without cutting openings. I chose to do it my way because it was faster and I wanted my monster to be a bit funny looking. The other way would look a bit more polished I think.

I am about to start selling DIY Sock monster kits in my Etsy shop, and I think they'll make great gifts for older kids learning to sew.

3 comments:

You Might Also Like:

Related Posts Plugin for WordPress, Blogger...